首页 >> 新闻动态 >> 正文

Standard Updated - 2018年9月份标准更新通知

这是标准研究委员会2018910日的标准更新报告。此报告包含了新标准的采纳、老标准的更新及升级、IAPMO新的行业标准和国家标准的制定,以及作废的标准、标准的修改摘要和标准修改的20天公示通告。

 

请前往IAPMO在线商店购买IAPMO的标准。您还可以前往ANSI的网上商店或者其他标准发布网站购买IAPMO以外的标委会发布的标准。如果您有任何的意见或建议,亦或您有任何与标准有关的问题,欢迎来函至standards@iapmostandards.org垂询。


新版本标准更新

 

根据标准委员会表决通过,以下标准的版本进行更新。

之前版本

更新后版本

标准名称

ANSI LC 1/CSA  6.26-2016

ANSI LC 1/CSA  6.26-2018

Fuel gas piping systems using corrugated  stainless steel tubing

ANSI  Z21.10.3/CSA 4.3-2015

ANSI  Z21.10.3/CSA 4.3-2017

Gas-fired water heaters, volume III,  storage water heaters with input ratings above 75,000 Btu per hour,  circulating and instantaneous

ANSI Z21.93/CSA  6.30-2013

ANSI  Z21.93/CSA 6.30-2017

Excess flow valves for natural gas and  propane gas with pressures up to 5 psig

ASTM C1277-2015

ASTM  C1277-2018

Shielded Couplings Joining Hubless Cast  Iron Soil Pipe and Fittings

ASTM D2661-2014

ASTM  D2661-2014e1

Acrylonitrile-Butadiene-Styrene (ABS)  Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings

ASTM F438-2017

ASTM  F438-2015

Socket-Type Chlorinated Poly(Vinyl  Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40

ASTM F1281-2011

ASTM  F1281-2018

Crosslinked  Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe

IAPMO IGC 154-2018

IAPMO  IGC 154-2018a

Shower and Tub/Shower  Enclosures, Bathtubs with Glass PressureSealed Doors, and Shower/Steam  Panels

 

IAPMO IGC 345-2018

Polypropylene (PP) DWV Pipe with a Mineral  Filled Core and PP Fittings

IAPMO IS 31-2014e1

IAPMO  IS 31-2014e2

Installation Standard for PEX Tubing  Systems for Hot and ColdWater Distribution

 

标准新旧版本之间的区别您可以通过以下链接获得:

http://www.iapmostandards.org/Pages/SummaryChanges.aspx

 

Summary of Changes - ANSI LC 1+CSA 6.26 (2016-2018)

Summary of Changes - ANSI Z21.10.3+CSA 4.3 (2015-2017)

Summary of Changes - ANSI Z21.93+CSA 6.30 (2013-2017)

Summary of Changes - ASTM C1277 (2015-2018)

Summary of Changes - ASTM D2661 (2014-2014e1)

Summary of Changes - ASTM F438 (2015-2017)

Summary of Changes - ASTM F1281 (2011-2017)

 

IAPMO行业及国家标准

以下标准已出版:

(a)    IAPMO IGC 154-2018a - Shower and Tub/Shower Enclosures, Bathtubs with Glass Pressure‐Sealed Doors, and Shower/Steam Panels

(b)    IAPMO IGC 345-2018 - Polypropylene (PP) DWV Pipe with a Mineral Filled Core and PP Fittings

(c)    IAPMO IS 31-2014e2 - Installation Standard for PEX Tubing Systems for Hot‐ and Cold‐Water Distribution

 

首次采用的标准

以下标准被首次采用可以用于产品认证列名

EPA WaterSense Version 1.0, WaterSense Specification for Spray SprinklerBodies - 2017

 

20天公示通告

以下IAPMO的行业标准的制定或更新将在网页上公示20天。

标准号

标准名称

公示截止日期

IAPMO  IGC 352-2018a

Diverter Valves for Diversion of Rainwater or Storm Water for use  in Alternate Nonpotable Water Source Systems

2018-10-09